protect.CAT Walker short
Integrated air system for high comfort
Flat, non-slip sole for natural, stable gait
Lower leg orthosis: Comfortable walker for ankle and foot injuries – in a lightweight shell construction
protect.CAT Walker short is lower leg brace.
The product is exclusively to be used for the orthotic fitting of the foot and only on unbroken skin.
Air system with medial and lateral air passage around the ankle and up to the forefoot
Air pump and ventilation valve for easy handling
Easy adjustment and removal of toe protector
Flat, rounded sole for natural, stable gait
Ligament / soft part and tendon injuries (Postoperative)
Metatarsal fractures, severe distortions) (Nonsurgical)
Stable foot and joint fractures, fracture postoperative care (talus, luxation of the upper ankle joint)
How does it work?/Mode of action
Safe and effective immobilisation Three strap system ensures high stability and reduces anterior talar shift Available as optional extra: heel wedge sets for Achilles’ tendon rupture
Open the two lower belts and the upper belt on the left-hand side. Fold the shin and the belts away to the right. Remove the inner shoe from the Walker. Open the leg and foot part of the inner shoe by loosening the hook and loop fasteners. Ask the patient to place his foot and lower leg into the inner shoe. Make sure that the air chambers are empty and that the valve is loosened anti-clockwise (deflate). Close the inner shoe and make sure that it is firmly fixed to the patient's leg. Align the pump in such a way that it is sitting in the middle and so that later it fits into the space provided for the shin. Now ask the patient to place their foot in the half shell of the Walker. The lower leg and foot should be positioned so that they fit exactly into the shell. Check to see that the foot is properly set and positioned in the Walker. Make sure that the patient's toes are not pushing against the toe protector. If necessary, the toe protector's position can be adjusted or it can be removed completely. Now place the loose shin onto the patient's shinbone and foot from the front. Make sure that the pump and ventilator fit into the spaces provided. Close the upper belt. Retighten the right-hand belt again as well in order to stabilise the system. Then close all the other belts one after the other. The belts should fit tightly. Extra material can be cut away. Ask the patient to walk around in the orthosis to make sure that the Walker is sitting properly. To tighten the Walker's fit, the air cushion can be filled using the pump system. To this end, close the valve by turning it clockwise (inflate) and then pump air into the chamber. The padded pieces can be used as additional padding.